Pick Up An Apocalyptic World

Regarding the smearing of China, some foreign media are really black and black, and don't care about the authenticity of the news.

What they need is hot spots, what they need is attention.

For these media, there is nothing to say.

The mouth grows on someone else, unless you can kill the other person, otherwise, they are disgusting you.

Such things are taken out of context, at all times.

Li Wenhao didn't know the outside media, because the new materials they leaked had already caused a lot of noise.

But even if you know it, there is no big deal.

He is noisy to his noisy, so he can do his own things with peace of mind.

After displaying the new material, Li Wenhao continued to introduce it after the others returned to the own seat: "I believe everyone has already seen this new material. If there is no problem with the new material, then I will continue to introduce it. "

Speaking, Li Wenhao looked around to see if there were any questions.

I saw other people looking at him attentively, but they didn't speak.

They are not really without doubt. As a new type of material, it is still a material that can be used to make chips. How can there be no doubt about it.

However, they also know that some questions are not suitable to be raised now. After the meeting is over, when the R&D work is formally entered, it is not too late to discuss it slowly and study it slowly.

After Li Wenhao explained the new materials and then came up with the new materials, everyone subconsciously turned to Li Wenhao's side.

It's not that other colleagues are partial, because the two sides are not at the same level.

If Li Wenhao only briefly described the plan, everyone might still be inclined to Wang Dequan. After all, the 5-nanometer process given by Wang Dequan is a common practice in the world. The only difference is the difference in details.

Moreover, Wang Dequan has been studying the 5-nanometer process at Huawei HiSilicon for a long time, and I don’t know how long it has been possible for the 5-nanometer process to be realized.

But all of this is based on Li Wenhao's little deeds.

Now Li Wenhao suddenly gave new materials, just like when he was fighting the landlord, a bomb came directly after the cards were played. Although not as shocking as Wang Zhi, it also shows that the cards in Li Wenhao's hands are absolutely desperate for opponents. Of cards.

Li Wenhao hasn't really talked about how to use this new material to make a chip with a 60 picometer process, but now it is about the feasibility study plan, which is a general plan, and it will not be too late to study the details in the future.

Some people even think that perhaps at the end of the talk, Li Wenhao will directly take out a 60 picometer chip, they will not be surprised.

They seem to know how Li Wenhao solves the accuracy problem at the moment.

With the materials available, how to make "transistors" on this material is the most important and most anticipated thing.

Sure enough, after Li Wenhao introduced the new material, he began to introduce the equipment problem.

Li Wenhao operated the holographic screen and turned it down.

Title: "On How to Make a Lithography Machine."

When everyone read the title, they couldn't help but take a breath.

Fuck, does this mean to make your own lithography machine?

At first, everyone thought they would buy a Dutch EUV lithography machine as a chip made with a 60 picometer process. After all, this is the most advanced lithography machine at present. Apart from this, they can't think of any way to solve this problem.

But they never thought that Li Wenhao's ambition would be so strong, not only to get new materials out, but even the lithography machine wanted to make it by himself.

Although I was taken aback by this title, I thought about it again and I felt a bit taken for granted.

Although the EUV lithography machine produced by the Dutch ASML is the top lithography machine, it is really impossible to make 60 picometer chips.

Since even the top EUV lithography machine can't do it, can the lithography machine made by yourself be able to do it?

Everyone had this question in their minds.

The production of lithography machines is not something ordinary people can handle. Even the EUV lithography machines produced by ASML in the Netherlands are not produced solely by ASML. They are products produced by combining the technology power of the world's top companies.

Such a lithography machine can not meet the production of 60 picometer technology chips, can Li Wenhao's own lithography machine can achieve this function?

Or in other words, like new materials, physical machines have been manufactured?

Thinking of this, the people sitting under the conference room looked at each other, and then looked at Li Wenhao with fiery eyes.

Not only them, but Wang Dequan, who was sitting on the side, was full of eagerness in his eyes.

Li Wenhao was stared at by everyone's eyes, and his hair was straight in his heart. He couldn't help but joked: "Brothers, don't look at me with this kind of eyes. I don't have any special hobbies. My hobbies are normal."

Hearing this, everyone burst into laughter.

"As for the lithography machine I introduced, I haven't made it yet, but I believe that after listening to my introduction, you can basically judge whether you can make a similar lithography machine." Li Wenhao explained .

This kind of brand-new lithography machine, but Li Wenhao is based on the classic model of the apocalyptic world, in order to be able to manufacture it at this point in time.

Of course, at this point in time, because of the lack of many materials, all substitute materials are used.

This kind of lithography machine is more than enough to make a 60 picometer chip, there is no pressure at all, but the cost will be higher.

Now the competition is feasibility, and it is normal for the cost to be higher.

If ASML in the Netherlands knows that Li Wenhao has such a lithography machine, even if it is expensive, it will have to be purchased. This is related to the future development of ASML in the Netherlands. No amount of money is worth it.

However, the Dutch ASML did not know that a lithography machine far more advanced than the EUV lithography machine was about to be born in this competition.

After waiting for the laughter for a while, Li Wenhao began to introduce the production of a new lithography machine.

Compared with the introduction of new materials, when Li Wenhao introduced the lithography machine, everyone was very quiet, all attentively, for fear of missing some details.

They know a lot about lithography machines, but they know very little.

They have a lot of questions, but they also know that these questions are not raised now.

Without the questions from the people below, Li Wenhao explained much faster.

The whole person was talking about it, and after twenty minutes, I finally finished introducing the lithography machine.

"Do you have any questions about the lithography machine?"

After the explanation, Li Wenhao asked habitually.

After asking, he had some regrets.

Thank you for reading this story at mtlarchive.com. Your support enables us to keep the site running!