Otoko Nara Ikkokuichijou no Aruji o Mezasa Nakya, ne?

There isn't that much rubber on hand right now.

I just said 30 Kg. Although I may feel a lot, the amount of rubber I can take from a single rubber tree can be quite considerable. Especially since it is the paragomic mushroom that grows beside the barkud, the amount you can take in a day is known, but you can still pick as much sap as you can make raw rubber about 10g per day. I pick from 30 bottles, so about 250g is a day's production. You can make 7.5Kg per month. If I had gone to pick up the sap for a few days, I could pick up more than 40 Kg in six months.

It's an unpardonable amount as an industry, but from what I've seen, it won't be 10 times what it is now, but it seems to be native to a degree close to it, so if you take it in full, you can take a significant amount, or you can sow seeds and produce more trees. It is true that rubber noodles grow very quickly, in small quantities, but it should be possible to collect sap in a few years' time.

Well, what should I make it from first?

I guess shoes first.

Common boots are made of pig and other skins, with wooden planks on the soles of the shoes. And I'm even more skinned. It is not durable because it is smooth skin, but it does not fall within the scope of skin durability and is not comfortable. If it's a luxury item, I'd stick something like cork on the sole of my shoe and stick a board from top of it, but that kind of thing, my parents would be the only ones with it.

Shall I modify this place with sandals?

Cut the inner layer of the sandal out of a thin raw rubber plate.

Likewise strain the sole of the shoe with a rubber sheet cut out of the same raw rubber plate.

The sole also tensions and shapes soft rubber and black hard rubber with only added sulfur.

I made a few proper mountains of hard rubber.

I'll put some on.

It's a sandal for adults, so it's a rash, but would it improve comfort?

I don't know too well after the rash. Well, okay.

I've made it easy for now, but it doesn't seem to be a problem.

Something with an impact would be good next time.

I think I need to improve on the carriage wheels, but this one takes a lot of work, so I'll be behind. I guess the tyre production goes out of step just the outside tyre part, but I still want to make hollow tubes here too to make tyres with air. There's nothing you can't make if you take the time, but you can't make a valve. Oh, should I let wind magic generate gases directly into the tube? Valve, I didn't need it.

All right, you want to try? That's a tire tube first. Prepare a long cylinder about 5 cm in diameter and pour in a little rubber (brown soft rubber) before it solidifies there. If you stick a stick with a diameter of just over 4 cm in there, you can do a tube-shaped rubber. I could have wrapped the plate-shaped rubber around it and made it, but I rejected this proposal because the adhesive part would be longer.

You can connect the tubular rubber you can by turning it into a wheel a little smaller than the wheel. The connecting portion will need to wrap the plate-shaped rubber and replace the rubber before it solidifies with an adhesive. Only the connecting part gets a little thicker, but, well, it's the margin of error. I can wear tires anyway, so it won't be a problem.

Let's just put it in the wheel and let the wind magic create air inside. Oh, I got it. It will be a problem to increase the air pressure too high before covering the outer tire section, so it is only allowed to air to the extent that it swells. Just in case, I applied it to the water I strained in advance to make sure there was no air leakage.

Here, I realize I missed something serious, and I'm stunned. The outer circumference of the wheel, in this case it would be better to say wheel in the wind because I am going to fit the tire in. This wheel has only ever been a replacement for a tire, and the surface is just wrapped around the outer circumference of a wooden wheel with a flat elongated plate. Yes, there are no rims. It is clear that this does not allow the tire or the tube in it to be retained, and that if it moves out but proceeds for a few meters, the tire will come off and make no sense.

In order to make the rim, the outer and inner perimeter of the wheel of the metal plate wrapped around the outer circumference of the wheel must be raised. I can't do that much magic right now. I still can't create metal or shape the metal I already have, so do I have to give up here......

It's not like we have to make tires as soon as possible, so we're behind on the rim of the wheel. At the same time, the tires fall behind, but there's no choice. You'd better make something quick to gold, that is, something somewhat easier to sell first.

When that happens, I wonder if it's a protective gear made of hard rubber or ebonite? Well, it's a material, so you won't have to shape it into a protective gear shape. Should I have a couple of 3-40 cm square plank-shaped rubbers in place? I really wanted to put a net made of wire in about a few of them, but I gave up without being able to prepare the wire. You'd be pissed off if you rubberized a clasp on a boulder.

And then we'll also have pussies made of various sizes and rubber strings of appropriate length. Do you also have a thin film made of rubber that you have been making for the practice of handling rubber? This membrane is working hard, but the thickness is still finally 0.5mm. The sanitary rubber products I bought for souvenirs when I went on a business trip overseas in my previous life were thicker and didn't seem very good than domestic products, but of course they weren't unusable. Still, the thickness would be about 0.1mm.

If it's raw rubber now, it's hard to make it that thin while retaining strength, so I guess it's a long way ahead to be able to make sanitary rubber products. I'm sure there will be disease problems in urban areas and so on, and if I can do it, there is definitely demand...... This time you should just prepare the membrane.

And then we'll also have trinkets made of ebonite and things like small armor.

Well, I'm not in a hurry, so I feel like I can handle the wire or the gold net in the tire rims and protective gear if I talk to them. Heggard also has some knowledge of the production and nature of rubber, so you should understand that it will be necessary to make moulds, buy some additional materials, etc.

Months later, several prototypes were made. The increase in the level of magic and the ability to shape and process it contributed immensely. By further shaping the moulds shaped by ground magic and wind magic, fine rubber moulds can also be made. The mould doesn't need magic to work on pouring in rubber even if it's made of magic, so essentially anyone can make a rubber product.

I've also tried to make tires out of rims, but it's soil and not metal that can be produced by ground magic. I had no choice but to ask Heggard to make the wheel rim, but it would cost me a lot to make the metal product from scratch, but I would also need the drawings. Also, the blacksmiths are only in the city of Dorrit around here, so it's hard to just fix them if they fail to create one.

In my scarce knowledge, Dwarves were a species that was good at blacksmiths. There's a dwarf in Barkud Village. One of my squire's family is a dwarf. I asked Flintgate, Dwarf's squire, with anticipation, "If Dwarf is all about blacksmiths, how can Dwarf make crops and brew booze?" I was told.

That's right. Besides, I've never seen anything doing blacksmithing, and I've never seen any blacksmithing tools. Does this turn up more heat for magic training so that metal can also be processed... No, I can't do that. I was also anticipating an unmagical level increase this time, but whether you continue to train at the same pace, the next level increase will take about 4-5 years to put the upcoming MP increase into the calculation of the increase in the number of trainings.

A tire with air can only be used for the moment. I also tried to make tires that would be an alternative, like raw rubber on the inside, soft rubber on the outside of it, and hard rubber baumkuchen on the outside of it. I also feel that it has improved considerably... I can't tell you if I can sell it.

The pussy was stretched with improvements and the material of the pussy body was also made of ebonite and hard rubber. The handle portion was also improved to make it easier to grip. I think I've already crossed the toy range. You can call it a slingshot.

Try the power for the right tree, depending on the distance and the type of tree in question, but we could confirm that the pebble would plunge in. Did the plate for the material of the protective equipment made of hard rubber scratch the surface a bit? It could be confirmed to the extent that, along with the power of the slingshot, it would also be possible to prove the defense of rubber protective equipment.

I also used soft rubber to make hoses about 1-2cm in diameter. There won't be much demand in the village of Barkud, because I thought it might be used for something as a siphon in urban areas. And then I made a seat futon out of soft rubber as well. I try to get some air inside by shaping it like a seated futon. Since the rubber is thick, there will be no air leakage. I thought that the use of the carriage owner, protection of the load, etc. would be extensive if the appropriate cloth was worn.

Since I still can't make tires with air due to rim problems, I made improvements to tire parts of hard rubber and air tubes of soft rubber, while allowances and depending on what I came up with.