Naruto: Treasure Merchant

After feeling a little hot, Uzumaki Gaoyi began to pay attention to his surroundings.

The internal area of the material is wide.

There is a large container in the corner.

There is nothing in it.

It has a button on it.

It looks like the exit of Han Spring.

I tried to say it.

Uzumaki Gaoyi tried it with his finger.

It is very cold and biting.

This is the kind of quenching special liquid I want.

Then Vortex Gaoyi came to the front, with only a few simple arrangements.

A forging table, a die table and a die table are attached to the bottom of the raft.

As soon as the switch at the bottom of the crucible is turned on, the liquid inside will flow out completely, and there is a ladder next to the table that goes directly to the top of the raft.

On the square porcelain plate are written three words.

Open the feed port and suddenly drill out hot gas several times the temperature of the room.

Apparently, the cockroaches here are placed directly outside the room, directly above the magma.

For this design, Uzumaki Gaoyi was a little worried, worried that this cockroach could not withstand the heat of magma.

But he put the cockroach down and burned it for a long time without seeing any change, and Square slowly put his large knife into the dry pot and melted.

I don't know how long it took for Vortex Goyi to melt all the molten iron into molten water, and Vortex Goyi lost fine gold and Mithril silver.

The whole of Beijing-Tianjin and Mithril still have a short time.

Vortex Gaoyi uses this time to capture the shape of the abrasive.

Regarding the shape of the finished knife, Uzumaki Gaoyi decided a long time ago.

It follows the prototype of the Nakaku Anti-Japanese Sword.

The only difference is the back of the knife, the place of the blood trough, the whirlpool Gaoyi ready to see, the dragon blood trough, the small space on the back of the knife is just the dragon's eye, open the dragon's mouth powerful dragon body As long as it breaks into the enemy's body, the blood will naturally enter along the dragon's mouth, and immediately flow through the dragon body, and the blood dragon will jump on the knife robe.

Use alien blood and soul to sacrifice the totem of Zhong Shu.

This is one of the things that Uzumaki Goyi has always wanted to do.

And now, as long as you wait for the fusion of the three metals, the hegemonic blood dragon knife is about to be born.

Over time, the fine gold and secret silver in the oven slowly disappear into the strontium iron solution, and the stirred solution begins to slowly change color, and then there is a tendency to solidify.

It's time.

Turn on the bottom switch and the boiling solution will flush directly into the tool.

After a while, the gigantic whetstone was filled.

After the solidification cools down slightly, the vortex Gaoyi directly clamps the formed large knife to the casting table.

The big hammer whirlwind on the blade, and Mars splashes.

The sound of the dancing hammer continued directly for a long time, and the cockroach did not stop.

This technique continues to form a molding method, which is the most difficult technique in European casting methods.

Due to the high strike density, it is difficult for the temperature of the knife embryo to drop, and forging can continue.

And such forging, first of all, in order to meet the conditions, the impurities of the tool are almost removed, and the requirements for forging are very high.

But high-density forged blades are very exaggerated.

Releasing the cold spring, Uzumaki Gaoyi wiped the sweat from his head with a buzzing sound.

I finally finished casting.

Finally, only the polished surface and edges are left.

These steps are no longer needed in this room.

Using the already finished big knife, Uzumaki Gaoyi's psychological face was quite satisfactory at this time, and although it was not a complete finished product, this blood dragon had already begun to appear.

The smooth blade, blood dragon groove, and deep bronze make it look more like an unearthed artifact.

However, the cold light that appears from time to time can make anyone feel the clarity that will be revealed.

The handle is half-length and suitable for use with one hand.

Also very good power.

Nodding in satisfaction, Uzumaki Gaoyi took the knife and went to the other side.

From the top, it is the casting knife chamber, and for a truly complete setup, there is a road next to the casting tool chamber, which goes directly through the grinding area.

Before the stocky boss took root, Uzumaki Goyi said that as long as the finished product is finished, you can spend money to process the processing area, find someone to help finish the polishing, and open the final steps.