Lord of Ashes

, The fastest update to the latest chapters of the Lord of Ashes!

Zhang Yanhang woke up very early this morning. He woke up at about five in the morning. After wasting some time for making choices and eating, he started researching at six in the morning and has been studying for a whole morning.

The six hours of research did allow Zhang Yanhang to find some useful gains. For example, he determined that the exoskeletons, mouthparts, and most of the organs of the red iron ants were useless to him, although some were barely refined. White quality equipment, but what he needs is higher quality equipment.

Well, I might know that this is not actually a harvest. Zhang Yanhang's real harvest is actually the formic acid of hematite. He found that the corrosion intensity of this thing was unexpectedly high.

Even the famous aqua regia melting metal takes several minutes to soften it to a certain extent, but what about the formic acid of hematite ants? It only takes a few seconds to spray on the rough hematite to soften it to a level that can be eaten.

The gap between the two is undoubtedly quite large. If an ordinary person is exposed to the formic acid of hematite ants, it is estimated that the place where the formic acid is exposed will be corroded into a big hole, after all, even hard. Hematite rough can't resist corrosion, let alone fragile flesh and blood organs.

And this is only the formic acid of the hematite worker ants. Their low-grade formic acid can only melt the rough hematite, but the formic acid of the hematite flying ants with higher strength can melt the hard impurities in the hematite and corrode the strength. It is undoubtedly raised to a new level.

To put it another way, since the hematite discharged by hematite workers is of green quality, it means that their formic acid can melt white quality materials.

The refined hematite discharged by the hematite flying ants has a stronger blue quality, which means that their formic acid melts the green and white quality parts of the hematite.

Since the formic acid of hematite flying ants can melt even green quality materials in a short time, it shouldn't be a problem to use it to melt the enemy's fragile flesh and blood?

Based on this development idea, Zhang Yanhang fused the formic acid of hematite flying ants several times, or in other words, concentrated it several times, causing its corrosion strength to rise again.

Zhang Yanhang looked for a piece of frozen pork from the house and smeared it with concentrated formic acid.

As a result, the whole process was like magic. In less than a second, the black scars representing the corrosion marks of the acid had spread to the whole piece of pork, and the moisture inside the pork was continuously absorbed and evaporated, and the volume was rapidly increased. Zoom out.

Then in the blink of an eye, Zhang Yanhang was left with only a pool of pus and a small part of black pork residue in front of him.

Next, Zhang Yanhang experimented with the concentrated formic acid with refined hematite, and found that although the melting speed was much lower than that of ordinary pork, it was still softened quickly.

"The concentrated formic acid can melt blue-quality materials..." Zhang Yanhang felt that if it had this level of corrosion strength, it was indeed worthy of use.

Although it can’t be used to deal with ordinary mobs, it may be used when dealing with lord monster trackers. Moreover, according to Zhang Yanhang’s experience in playing Resident Evil, acid is actually more suitable for use. Deal with it.

More importantly, after the formic acid enters the enemy's body, it will continue to cause corrosion damage to it, which is also very suitable for killing trackers.

"So, the question is, how should I put formic acid into the enemy's body? Or, even if it can't be put into the enemy's body, at least it must be put on the enemy's body surface so that it can cause damage. Corrosion damage."

Zhang Yanhang feels that he has now officially found an entry point suitable for squeezing, but he has no idea how to use the value that has been forcibly squeezed out to earn greater value.

He brought back a lot of formic acid from hematite flying ants this time, so if it is used to make weapons, as long as the specific design ideas can be determined, then small-scale mass production can be achieved.

"First of all, it is definitely not possible to make a melee weapon. If you use this thing to make a melee weapon, formic acid is estimated to have corroded the weapon before the battle begins. Therefore, you can only make some long-range weapons, such as ants. Acid grenade and formic acid bullets."

Zhang Yanhang thought for a while, and then directly took out some 5.56mm caliber bullets from his pocket as the subject of this experiment.

When he was doing inlay experiments in the world of ashes, he inlaid a lot of miscellaneous things, such as the alchemical materials used to make barbecue seasonings and the current bullets, which he merged by the way at that time.

At that time, compared with hematite and refined hematite, these things mainly served as a control group, but what I didn't expect was that they were actually used after returning to the main world.

Zhang Yanhang then tried to use alchemy to encapsulate formic acid directly into the bullet, but found that just after it was encapsulated, the concentrated formic acid had corroded the metal shell of the bullet.

"It seems that direct encapsulation shouldn't work well, even if you can force the bullet to be in a freshly encapsulated state by relying on the lack of time lapse in the space in the waistpack~www.novelmt.com~ but it would be too troublesome to use..."

Zhang Yanhang feels that perhaps he should solve the encapsulation problem before making formic acid bullets, or to find a substance that can temporarily resist the corrosion of formic acid but is not too strong.

Zhang Yanhang's current manufacturing idea is to coat a layer of formic acid on the outside of formic acid. This layer of film must be able to withstand the corrosion of formic acid in a short time, at least to ensure that the bullet will not be corroded by formic acid during shooting.

Secondly, it is necessary to ensure that the strength of this film is not too high. If it is too high, this film will be wrapped in formic acid and fall off directly when the bullet is broken. If you want to cause corrosion damage, you must make this film and the bullet Break together, only in this way can formic acid be injected into the enemy's body smoothly.

Zhang Yanhang then used some common anti-corrosion materials for packaging, including ceramics, diamonds, silicon nitride, silicon dioxide, copper oxide, and glass fiber...

However, Zhang Yanhang did not find a suitable object after experimenting for a long time. "In other words, since formic acid can corrode even blue-quality materials, why should I use these ordinary materials in the main world to experiment? This idea may be the same. There was a problem in the beginning."