Get Black Technology From Marvel

　　 Bilibili’s backstage, private messages continue.

　　 Most of them are reminders from fans, and some technical parties inquire about the technical process.

　　 Some others are invitations from various platforms, hoping to cooperate.

　　 There are even several well-known brands.

　　Because Lu Cheng did not publish his contact information on the platform, they could only contact them through private messages.

　　 "It seems that an explosive video has more influence than I thought." Lu Cheng couldn't help but sigh secretly.

　　 He glanced at the number of fans again.

　　 This is only half a day, and the number of fans has risen by 100,000 to 300,000!

　　 has reached 1.5 million views.

　　 As for the technology point, it increased by 1000 again, reaching 7000 points.

but.

　　 Cheng Lu knows that the video was recommended and exposed a few days ago, so there will be a short-term explosive growth.

　　 After a few days, the popularity will decrease, and the number of broadcasts and the number of fans will gradually stabilize.

　　 Lu Cheng replied a few private messages, and then once again devoted himself to the production of exoskeleton armor.

　　 Before, he only made mechanical limbs, and he hadn't made helmets, breastplates, and the driving device behind them.

　　 With the robot knowledge learned from "Big Hero 6", I can just enrich this unfinished part.

at the same time.

　　 Cheng Lu also bought some materials needed to make a 3D printer online.

　　 Except that the special ink benzene tin needs to be upgraded with technological points, the other materials can be found in the world in the same style or alternatives.

　　 After two days of busy work, Lu Cheng finally made the breastplate of the mechanical exoskeleton.

　　 After wearing it with the mechanical limbs, it becomes even more handsome.

　　 It feels like a future soldier!

　　 However, Lu Cheng did not publish the video immediately.

　　 He plans to release all the equipment together.

　　 Demonstrate like this, the effect can be more shocking.

　　 Just like that, ten days in a row passed.

　　 Cheng Lu finally produced a full set of exoskeleton armor.

　　 At the same time, materials related to the production of 3D printers have also been purchased one after another.

　　 According to the relevant drawings in his mind, Lu Cheng started to assemble a 3D printer.

　　 Build the framework, set the program, and polish the material.

　　 It took a full day to finally make the finished product!

　　 This is a three-meter wide and five-meter high device.

　　 The appearance is a bit similar to ordinary printers, but it is much more complicated than ordinary printers.

　　 At the top is the material input port. After the material is input, the system will go through internal inspections to classify these materials and divide them into various areas!

　　 Then, import the modeled 3D drawing, set the relevant scale, and then start printing.

　　The printed finished product will be slowly generated from the outlet made of special nanomaterials below!

　　 If the height or width of the modeling exceeds the capacity of the 3D printer.

　　 3D printers will print layer by layer according to the modeling, and the rest will need to be assembled by themselves.

Of course.

　　The width and height of the 3D printer can also be adjusted by yourself.

　　 Because Lu Cheng now only needs to print prosthetics, there is no need to make the 3D printer too big.

　　 "Try the effect."

　　 Cheng Lu imported the designed 3D model inflatable doll of Mr. Tian Haiyi into the 3D printer.

　　 Then, the related materials were also thrown into the material port, and the start button was pressed.

　　 da da da—

　　 Soon, the 3D printer lit up and started printing.

five minutes later.

　　 With the sound of ‘ding’, the inflatable doll was slowly made from the exit.

　　 Lu Cheng opened the finished product warehouse, took out the inflatable doll, and started to look carefully!

　　 "It's perfect, it looks exactly like a real person." Lu Cheng was surprised.

　　 The effect of the 3D printer is amazing.

　　 perfectly reproduced every detail of Teacher Tian Haiyi.

　　The proportions of each item are also very accurate, which is almost the same as the modeling graphics.

　　 is simply a little cow basking in the sun-awesome!

　　 Once this product is launched, it must be the gospel of the otaku.

　　 Those two-dimensional wives, through 3D printing, can almost perfectly appear in the real world!

　　 is no longer in fantasy.

　　 "Ahem, this thing still can't be seen by Xi'er." Lu Cheng coughed dryly.

　　 He quickly put the inflatable doll in the material port, and then pressed the factory reset button.

　　 Soon, the inflatable doll was sent to the 3D printer.

　　 After a while, it became raw material again.

　　 Of course, the content of materials has been reduced.

　　 When making the inflatable doll just now, it was impossible to use all the materials.

　　Some excess materials will be sent to the waste compartment of the 3D printer.

　　 "Compared with exoskeleton armor, this is black technology!" Lu Cheng sighed secretly.

　　If this 3D printer technology is made public, it will surely cause earth-shaking changes in the production and processing industry!

　　 can not only reproduce the modeling drawings perfectly, but also the production time is very short.

　　 "Ten days have passed, and it's time to publish the second video in the zero-based series."

　　 Cheng Lu put the 3D printer in the garage, and then began the production and editing of exoskeleton armor.

　　 After ten days of fermentation.

　　 The popularity of the video has also gradually decreased, and the final playback volume has also been fixed at more than 3 million.

　　 fans increased to 500,000.

　　 A video that attracts 500,000 fans is already phenomenal!

　　 After all, some up owners, working hard to update for one or two years, may not have this number of fans.

　　 Cheng Lu looked at the broadcast volume of other platforms. Although it is not as high as Bilibili, there is still a considerable amount of broadcast.

　　 The whole network adds up, UU reading www.uukanshu. The number of com views has almost exceeded 10 million!

　　 Technology points have also increased by 3000 points accordingly.

　　 However, because Lu Cheng used 2,000 technology points for his 3D printer, his current technology points are still only 7,000.

　　 "It's really useless. You must earn some technology points as soon as possible. When the company is officially established, a 3D printer is definitely not enough."

　　 Lu Cheng did not delay any more, and began to devote himself to the production and editing of exoskeleton armor videos.

after one day.

　　 The second video in the series from scratch was officially released.

　　 The title is: The full version of exoskeleton armor from scratch.

　　 has just been sent out for less than ten minutes.

　　 The number of views quickly exceeded 10,000.

　　 A barrage was also brushed up.

　　 "He is here, he finally came with black technology!"

　　 "Ah, this time it turned out to be the full version. It's a conscience-up master."

　　 "The hangover is coming, what hang up is going on this time?!"

　　 "I don't need any skills to do black technology, I just need to open it!"

　　 Lu Cheng looked at the full screen of the subtitles of ‘Hang Bi’ and was a little confused, and immediately reacted.

　　 A previous comment asked what skills are needed to make exoskeleton armor, and he replied: No skills are needed, just open it.

　　 Unexpectedly, it was played directly as a stalk.

　　 I have to say that the ability of sand sculpture netizens to insert needles is quite good.

　　 However, it was a mess, and many netizens refocused their attention on the video after joking.

　　 When they saw the new features of this exoskeleton armor, they couldn't help but be shocked again!

　　Ps: There are so few tickets, ask for a recommendation