From Propulsion City To Multiverse

A clone of Wang Gao appeared inside the lunar scientific research base and participated in the work of cracking the spacecraft this time.

And Dracula and others are waiting outside the base, ready to deal with emergencies at any time.

Various instruments and equipment, installed in the laboratory, surround the spherical spacecraft, constantly analyzing the surface of the spacecraft.

Wang Gao has already seen that the outer shell of the spacecraft is made of N silicon and several unknown neutron materials. As for what is inside, it is still unknown for the time being.

Now I can only take it slowly, first to figure out the composition of the shell.

As for opening the hull of the spacecraft, in fact, Wang Gao had several ways to open the hull of the spacecraft. Even if the hull of the spacecraft was very strong and made of neutron materials, it could not stop his determination to find out.

After collecting all the data on the hull, he began to prepare to open the hull of the spacecraft.

A soldier wearing a cutting base armor tried to mobilize the regular power of cutting fruits and cut open the smooth, mirror-like hull of the spaceship in front of him.

This fruit was from the former CP0 agent. After being recovered by Lucifer, Wang Gao made this devil fruit into a base armor.

The ability to cut fruits is not only powerful in combat, but also very important in the field of cutting processing.

For example, the general processing methods of superhard materials such as sea floor stone are really difficult to complete. At present, there are two main processing technologies for sea floor stone.

One is to use sea floor stones to collide with each other to knock out the approximate shape little by little; the other is to use small particles of sea floor stones and add them to the molten metal to make equipment containing sea floor stones.

Usually these two processing methods are used together. Large pieces of sea floor stone are knocked out of high-purity sea floor stone products; while the relatively medium sea floor stone fragments are used for inlay; the smallest particles or powders are added Among the molten metal, it is cast into stone products containing sea buildings.

For example, to advance the first three floors of the city, even those with the Devil Fruit ability only use metal shackles containing sea tower stones instead of high-purity sea tower stone shackles.

In the past, CP0 often used Kaido to secretly purchase the raw ore of Hailou stone from the country of Wano, and then processed it into Hailou stone products by itself.

Because the CP0 agent of the fruit-cutting ability person died, CP lost the ability to quickly process the sea floor stone.

On the other hand, the People's Republic of China has already developed a popularized sea-building stone cutting technology, and has developed a resonance crusher and an N-silicon high-pressure water jet cutting machine.

It's just that the People's Revolutionary Federation did not discover the sea floor stone veins, and it also has the technology of man-made sea floor stone, so this technology is only used as a technical reserve.

It is not entirely dependent on the annual ability of the Devil Fruit, which is one of the development strategies of the National Revolutionary League.

Even if there is a cutting base prepared by cutting fruits, the conventional cutting technology still needs to be developed and prepared.

The CP organization lost the cut fruit this time, which caused the production capacity of the Hailou Stone Processing Plant to be greatly affected. This is the consequence of walking on one leg.

Look back to the laboratory.

Cut the fruit to pry the regular force, acting on the hull of the spacecraft, and a crack appeared in the hull of the spacecraft instantly.

Just before everyone smiled, the hull of the spacecraft repaired itself instantly.

"Memory material?" Wang Gao reacted instantly.

The soldier tried again, and when the incision appeared, within a few seconds, the incision seemed to come alive and fuse together again.

Although the hull of the spacecraft was healed again, Wang Gao still observed some conditions inside the spacecraft through seeing and hearing.

The shell made of this kind of memory material is not very thick, only about 3 cm. The inner side of the memory material layer is a bulkhead made of other materials.

Wang Gao thought for a while and readjusted his plan.

After a while, the cutting experiment restarted.

But this time, in addition to the soldiers wearing the cutting base armor, there are also two soldiers holding pipes, preparing.

At the moment when the shell was cut, the two pipes were also inserted between the electric flint and along the incision.

The memory material began to repair itself and squeezed the pipes instantly. One of the pipes was squeezed and the other pipe with a thicker wall resisted the squeezing.

These two pipes are made of N-silicon. When the pipe with a thinner wall still cannot withstand the squeezing of the memory material, it can be seen that the squeezing force is terrible.

If a person's arm is placed on the incision, even if it is covered with armed color, it will be instantly crushed into scum.

With a pipe inserted into the spacecraft, there is room for operation.

I saw a soldier raised his hand, released a gray tentacles, rushed into the pipe, and spread to the inside of the spacecraft.

With a squirm, a part of the bulkhead inside the spacecraft was cut off, and the tentacles entered the cabin inside the spacecraft.

Then the tentacles quickly penetrated into the various compartments inside the spacecraft.

On the other hand, Wang Gao checked the data obtained by the soldier through the biological computer. The inside of the spacecraft could not see his fingers. He could only rely on the lighting fireflies released by the tentacles to see the situation inside.

The furnishings inside the spacecraft are somewhat incompatible with the styles of the Bikha Shrine, Shrine, and Mausoleum.

If we say that the style of Bika Temple, Shrine, and Mausoleum is a cyberpunk style of mystery, primitive, and technological integration.

The interior style of this spaceship is the hard-line science fiction style of the future, technology, and geometry.

The two completely different styles made Wang Gao feel incongruent, as if they were pieced together.

The equipment inside the spacecraft has not been corroded by the years and still maintains its luster.

Soon Wang Gao and a group of researchers made a discovery, and that was the way the hatch was opened.

Although the spacecraft seems to have lost its energy supply, causing the door to be unable to open, the method of opening is still analyzed.

By irradiating ultraviolet light with a wavelength of 85 nanometers and heating the door to 42 degrees Celsius, the spacecraft door can be opened from the inside.

Soon the hatch was opened.

This dust-covered spacecraft for thousands of years was finally opened again.

After the hatch is opened, the disassembly of the equipment becomes more convenient.

With the cooperation of the soldiers, a group of researchers carefully disassembled the equipment inside the spacecraft.

Only Wang Gao looked at the internal structure of the spacecraft and thought silently.

Inside the Ark Proverbs, in addition to the cockpit, dormant cabin, living cabin, material storage cabin, and transportation corridor ~www.readwn.com~ the remaining cabins are a functioning energy cabin, a power cabin, and four empty cabins. Cabin.

Looking at these four empty cabins, Wang Gao did not ignore these four cabins, but paid more attention to them.

Although the contents are gone.

But this does not mean that some information cannot be obtained from it.

For example, empty cabin 1, this cabin is connected to the cockpit and living cabin, there are some fixing and ejection devices, and the side wall shell can be opened. Obviously, the function of this cabin is most likely to be a place for storing escape ships.

And empty cabin 2, this cabin can also open the outer shell of the side wall, and there are a lot of pipes and wires, which are connected to the energy cabin, and there are many fixed devices inside, which must be the storage of some kind of high power consumption equipment. cabin.

The empty cabin 3 is exactly the same as the empty cabin 2. The only difference is that it is on the left and right of the cockpit.

The last empty cabin 4 is located at the bottom of the spacecraft. Judging from the shape of the interior of the cabin, what is stored inside is a spherical device with a radius of 3.14 meters.