Editing Backroom: My Inventory Scares the Backroom Entities

"Wait! Everyone, wait first! The big guy next door posted a video again! "

Roll up! The big guy and the UP lord are rolling up again! "

“666！ I like watching the UP Lord and the Big Guy roll up the most! Countless

people poured into the Black Six area again and clicked on the latest video published by Black Six.

[Inventory of the Quick Cut Items in the Quick Cut Player Association Object C-56 - "Memory Cutting Machine"! ] 【

Object C-56 - "Memnese"

】【Distribution:】

【Distribution in a few levels of the C-layer group in the back room. The list is as follows:

] [Level C-67] [Level C-91] [Level C-148] [Level

C-170]

[These levels without exception have at least a very difficult entry or exit. 【

More distribution is in exploration.】 【

Description】

【The appearance of the memory machine resembles a flashlight in the front room. 【

A small switch at the end of the item can control the switch of the item.】 【

When the item is opened, it glows and creates a mist of light in the air that can be seen in all directions at a distance of 4.1 meters from the front of the item.】 【

The shape of the light mist is a rectangle on a sphere, and if it is projected on the cutaway plane in the center, it will become a rectangle 2.0 meters high and 0.9 meters wide.】 【

No matter how you rotate the item itself, it will project such a roughly vertical rectangle, but the light it emits will be blocked by other objects.】 【

There are five wheels that can be rotated on the item, four of which have codes for all layers and numbers with 3 digits 0~9.】 【

From top to bottom, form a complete number of the hierarchy.】 The fifth wheel is marked "Shift".

】【Cut out each part of the memory cutter to the outside of the item, and you will find that the internal composition of the memnese machine and the structure of the flashlight are basically the same.

【Nature】

【The nature of the memnese machine is more complicated. 【

For each wanderer, the scene in the light and fog projection is generally different. 【

When rotated to the level that the Ranger once experienced, the light and fog projection will show the initial scene that the Wanderer initially saw when he first entered the level, and it was completely black and white. 【

This time fog can be cut directly.】 【

Turn the "Shift" wheel to select the time point to cut according to the chronological order.] [

For example, the shift wheel is offset by one block, which shows the second time the wanderer cuts to the level.] 【

For unreached levels, the light fog will not show any image and cannot be cut.] 【

The memory cutter in this state has little significance for lighting, because it can only display a piece of light fog. [

Cutting into the light fog with the scene will allow the wanderer to reach the level shown by the scene, and the entry point will be similar to the location when entering the level before.]

[But at this time, the wanderer no longer seems to exist as an entity, but only as a "bystander" with the ability to think and see.

[This perspective can't move, but it can rotate in a strange way] (Rangers describe it as "a picture that requires you to imagine in your head turning around when you are weightless, and it's very difficult to control.")

[At this time, a time exception will occur. 】

【For ease of description, we call the time point that is cut out using the memory machine the cut point, and the time when the wanderer first experiences the hierarchy is called the memory point.】 [

The wanderer's consciousness that cuts to the level will gradually go back to the memory point from the tangent point, such as seeing the sun and moon of the level reversed, the entity wandering back, and seeing his body backwards towards the visual point when the memory point is approaching.

During this process, the wanderer will not feel unwell and hungry, and will not fall asleep, but may be bored because he is too bored and lonely. 【But

we remind you: once the memory machine is used, you can't regret it.】 Choose carefully. [

After the memory point is backtracked, the wanderer will be able to move freely. [

In a non-rigorous description, the wanderer reaches the exact same timeline as the real backroom, but according to the wanderer's behavior, it will gradually detach from the real timeline.] 【

The wanderer will spend some time until the cut point.】 【

A short time before the cut point is reached, a mist of light appears in front of the wanderer, and a strong suction force is generated. 【

The wanderer will inhale the light mist and cut out to the tangent point.】 At this point, the wanderer returns to the original timeline. 【

If the wanderer dies, it will suddenly appear at the cut point of the memory machine at the moment of death.】

Wanderers in this state usually show great pain. [

To the outside world, the wanderer seems to enter the light mist and return immediately. 】

【After returning, the memory cutter will directly stop glowing, the switch will spring back into place, and the selector will spring back to "I-0-0-0" mode.]

[And it seems to consume 20% of the electricity at once.] 】

【Each memory cutting machine can only be used 5 times, and the use of conventional means to replace the battery and the use of cutting out means to replace the battery have not been successful.

[In short, the memnese machine can make the wanderer enter a different timeline, first "rewind" to a specific entry point in time, then proceed to "now", and exit the timeline in "now". 【However

, please note that the spatial form of the timeline that this item returns to is not necessarily consistent with the real timeline.】 【Purpose

】【Go back in time to practice quick cutting, without affecting survival in the real world and time progression.】 【

It may be used differently for different homeless people.】 【

Quick cut players for item control measures】

【Quick cut players remind: This item can be traded, but please follow the specific rules in the speed cut competition, and violators will be punished according to the rules. 【

In a quick-cut record with time, it is recommended to mention the number of exercises to use the memory machine.】 It is forbidden to use this item during a quick cut. 【

Appendix

】【The following is from the official forum record of quick-cut players】【Speed-cut

player official forum】【

Let's break through the extreme speed! 】Quick

Cut Player Staff Post (Open Discussion

) (Topic #4897)

About the Disappearance of the Memnesion Machine

[Admin] Cryo-Hydro

Recently, are you talking about the whereabouts of our stored memory cutter in the midpoint of the Quick Cut? According to the report, several memory machines have suddenly disappeared recently. Please leave a message to inform those who have clues.

Posted on 2020/6/27

Jenny Cossima

I can't do it! Frozen hydrogen big brother doesn't know?

Posted on 2020/6/27

[Admin] Cryo-Hydro

I'm really sorry, I went out to practice speed cutting recently, but the person who substituted for me was touching fish.

Posted on 2020/6/27 Dawn_over_prism

Sorry for borrowing (rotten)

Posted on 2020/6/27

Everything_Undealt

I will organize a survey immediately.

Posted on 2020/6/27

[admin] Cryo-Hydro

thanks.

Posted on 2020/6/27

Dawn_over_prism

ohhh! Unresolved, my God!

Posted on 2020/6/27

Wind Sleeper

Big Shot!

Posted on 2020/6/27

Jenny Cossima

Stack! Teach me a quick cut! (Wait a minute, has he already cut away)

posted on 2020/6/27

Dawn_over_prism

Is the pending guy back?

Posted on 2020/7/4

Estronaut's

pending cases are all meticulous work, right? Besides, the back room is so big....

Posted on 2020/7/5

[Audio Recording] Recording

location: Level C-63

Recorded by: Everything-Undealt. Anonymous at my request.

Recording equipment: [omitted

] [recording staff

] [interviewer]

Are you?

You're the guy who's been wandering around Level C-63 these days?

I am. This time it was mainly to find someone. He took a lot of supplies for quick-cut players....

I wouldn't do that. Find someone else.

(pause)

Listen to me. You react differently than most people. Most people will listen to me finish the second half of the above sentence - "Do you know the whereabouts of this person?" - Ask some more about "quick-cut players".

But you're looking for the wrong person, but you're looking for the right person. That person... I know.

(Silence)

That's right... Please elaborate.

I'm sorry. It's a pity that you searched for more than two years, and you couldn't find the lost memory machine. They have been used up....

I wasn't going to get it back. Perhaps I had already guessed that they were used up.

Is that so? I...... Still sorry.

Even if you are sorry, we do not need you to compensate. The superiors have already taken these compensation from me.

All right. Are you looking for that person? He's in Level C-1 right now.

Oh...... It seems that I don't have to look for that person. Just ask you.

Yes? What are you asking?

What is he going to do with these memory machines?

Wait a minute, I want to think about how to talk about it.

It may be a long time to say. In 2016, he went to Yuanjiao at the request of the organization. In 2019 he decided to retire and found me and his son at Level C-63.

His son has been raised by me since 2016. By the time he returns, it will be no exception. Because I was in a squad with him before.

He brought back some photos, which were pictures of Yuanjiao. Because there is no Internet access in Yuanxiao, he said, "It's a pity that some people don't see the beautiful scenery of that level." "

That's it. We went out on an errand one day and didn't take the kid with us. He ran to Yuanxiao.

However, I remember that it was difficult to cut out from Level C-63 to Yuanxiao.

He has always stubbornly thought that it was your quick game. He thinks quick-cut players tell everyone how to link each level.

Is it? Possible. However, we are not in charge of this matter.

I also persuaded him, but to no avail. He just wanted to find an outlet for catharsis.

Your judgment is wise. So, what about the memnese machine?

He spent his days wandering in Level C-1 and lived almost next to the cabin. The memnese machine brought over is first transported from the midpoint of the quick cut to Level 11.

I guess it's the midpoint to Level C-34 and then through Level C-28 to Level C-63.

You guessed it right. Sure enough, your organization knows this the most....

He often used the memory machine to replay the story of Level C-63 at that time. It's about choosing those times to spend time with his son and going in. When I came out, I looked satisfied.

Wait a minute...... There is no way to enter Yuanjiao a second time, so why not let his son out?

He said he would wait for him to come out on his own.

This...... He has to wait at least a year before reaching the time that has passed.

Oh, yes. It will take more than a year, stuck only at that point... I don't know how he endured it. Even after spending all those time with my son, it is crazy, right?

yes, that's crazy, isn't it? It's hard for me to understand.

I once persuaded, but it didn't work. He would still use the memory machine to go back to the meaningless past over and over again, then wait a year and then live a predetermined life with his son. That's all... I also have a hard time understanding him. When he went to Level C-1 alone and asked me to help him hide it, I had the idea of lifting the table... But in the end I decided to look at the situation and see what this guy who was looking for him looked like.

Good. Excuse me. So, I will make this audio public, is it feasible?

Yes, it can be made public. So, let me say a few words to him as well. "Please don't live in the past, at least your son has settled in a place that can be called a fairyland..."

[Audio recording ends

] [Speed Cut Player Official Forum] [

Let's break through the extreme speed! ] Topic

: Preliminary Information Acquisition

(Thread #5322)

Hello everyone about the disappearance of the memnese machine

Everything-Undealt

. After a month of investigation, I finally got some preliminary information.

The detailed information is in the audio.

I will continue to investigate this matter and will go to Level C-1.

Posted on 2020/7/23

Is zhangbowen55

such a story... It feels a little dramatic, why one can go straight crazy because they never see their children....

Posted on 7/23/2020

Everything-Undealt

is worth thinking about. This question is pending.

Posted on 2020/7/23

Wind Sleeper

also has a lot of love is not the main reason why "he" in the audio is so persistent.

Posted on 2020/7/23

Zhangbowen55

Bird Food.

Posted on 2020/7/24

Jenny Cossima

awaits a follow-up report.

Posted on 2020/7/24

Dawn_over_prism

Where is the pending daddy now! I'm going!

yeah！ See Undecided Daddy!

Following the route given by the pending daddy, it took me only 21 minutes to cut the midpoint to Level 11! And this route has not been practiced once!

I am also going to start working on the case

, published on 2020/7/23, and last edited on 2020/7/23

zhangbowen55

You are also a dad! I'm going to start brushing the route woo-woo, who gave me a memory machine

published on 2020/7/24

[......]

Looking at the latest crawling out information of the web crawler, Black Six felt a lot of emotion in his heart.

"Sure enough, there are things in the Quick Cut Player Association that can cut into the timeline

..." "I don't know if Positron Particle Technology Co., Ltd. has this technology

..." "Forget it, when it's all destroyed, you will know everything

..." "Wait for me..." "I'll

take you away..." Black

Six turned on the computer and immediately sent a message to M.E.G.

【To M.E.G.】 [I need an update on the current investigation of the Quick Cut Players Association

] [...]

Soon, Black Six received a reply from M.E.G

.

Inside is a detailed M.E.G. on all the progress of the Quick Cut Player Association.

At present, the Quick Cut Players Association has been unable to withstand the pressure to open some areas and permissions to M.E.G. for investigation.

At the same time, the M.E.G. also sent people to the Irregular Speed Cut Competition Club and the Quick Cut Escape League to investigate.

"Irregular quick-cut competition club?"

Black Six thought about it, so he sent another message to M.E.G. .

[To M.E.G.]

[I want to know about a guy named 'Chen Tao' in the Random Speed Cutting Competition Club, preferably M. E.G. can you introduce me]

[...]